Hi, I have a project on kinetics and reactor design and I need help with only one question
The first question 1) Derive the rate algebra expression based on the mechanism given in the figure below. group number is 8
Category: Chemical Engineering
Competency
In this project, you will demonstrate your mastery of the following competency:
Examine the influence technology and social media have on personal and professional identity
Scenario
Bahar Career Coaching
After several years at your current company, you are ready for the next big challenge in your career. Although you have enjoyed your job duties and have a very good relationship with your coworkers and managers, you have decided that it is time to move forward with your career in the field you have dreamed of. Since you were unsure about where to start, a colleague of yours recommended you contact Bahar Career Coaching, a talent acquisition company that offers coaching and job placement to professionals seeking to advance or change their careers.
Directions
Digital Footprint Analysis
After contacting Bahar Career Coaching, you were paired with Priya Dahir, a career coach who will help you through your job search. After a number of meetings to discuss your professional goals and aspirations, she sent you this follow-up email with the next actionable steps:
From: Priya Dahir
To: p.dahir@bcc.com
Date: xx/xx/xxxx 3:15 p.m.
Subject: Digital Footprint Analysis
Good afternoon,
It was very nice to talk to you this afternoon. I am glad you are so committed to building your brand, and I am happy to be working with you on it! As I mentioned earlier, we need to start looking into your digital footprint. How you present yourself on the internet can either open or close opportunities for you.
Prior our next meeting, take some time to review your social media profiles and your use of technology. We want to make sure you are presenting your professional identity in a consistent way across platforms. I am attaching some key points and guiding questions to help you with your review. When you are done, send me your analysis in a Microsoft Word document. We will take a look at it during our next meeting.
Let me know if you have any questions,
Priya Dahir
Career Coach
Select two social media platforms that you have previously created an account for. You are encouraged to analyze your LinkedIn profile and another social media platform such as Facebook or Twitter. You can also analyze your blog or your personal website, if you have one. If you do not have any social media accounts, you can use the profiles in the Social Media Case Studies document located in the Supporting Materials section.
Once you have selected your social media accounts, analyze your digital footprint. You will analyze your social media and technology use for their impact on your personal and professional identity. In your 1,000- to 1,500-word analysis, make sure that you address the following points that your coach Priya has sent you:
In two to three sentences, describe briefly your personal and professional identities. What are the main elements that define your identity? Consider how you perceive yourself as a person and professional practitioner, and how others perceive you and your role.
Determine whether or not your social media profiles reflect your professional identity. Provide specific examples. Consider the following in your response:Do your profiles accurately depict your professional identity? Why?
What story do these profiles tell about you?
How do these profiles impact your professional identity?
Are there any inconsistencies between the profiles?
What are strengths and weaknesses you can observe in your profiles?
Identify two social media posts that you have published. Include a screenshot of your posts or a brief description of each. Describe how these posts could be interpreted in personal and professional settings. Give specific examples.How would prospective employers and coworkers interpret these posts? How would a friend or family member interpret them?
How could these posts impact how others perceive you?
What impact could these posts have on your personal and professional relationships?
Think of your technology use beyond social media (e.g., web searches, messaging applications, email and phone use, software use). Illustrate how your technology use could impact your personal and professional identity. How can you use technology to your advantage? What are the risks of using technology?
Describe the actions that you can take to manage and strengthen your digital footprint. Include specific details.What steps could you take to manage your digital footprint?
What should you start doing? What should you stop doing?
What changes could you make to your social media profiles so that they accurately depict your identity?
What to Submit
Every project has a deliverable or deliverables, which are the files that must be submitted before your project can be assessed. For this project, you must submit the following:
Digital Footprint Analysis (1,000–1,500 words)
Your career coach has asked you to conduct a digital footprint analysis in which you analyze your social media and technology use for their impact on your personal and professional identity. Your analysis should be submitted as a Microsoft Word document.
The diagram has to have the process steps, such unit operations and the usage of this unit regarding how good are you as a chemical Eng can make this process to be as perfect as possible.
Mention the advantage and the disadvantage of this process.
If the unit does exchange of heat exchange please do mention that and the processor with a diagram. Focus: TASK 2
Draw diagrams and sketches showing the progress of the unit.
Focus: TASK 3
What is mass transfer and heat exchanger regarding the unit process and please do mention the things such; (Tube and Shell).
I have started with the main idea please dear go through the project document just add what is missing area.
1. Sketching
2. How to improve
3. Improvement
4. Sketch 5. Diagram Total words are 2000 words.
1.The following type of bonding is strongly directional in solids.
Vander Waal’s
Ionic
Metallic
Covalant
2.Fog is an example of colloidal system of
A.solid dispersed in gas.
B.solid dispersed in liquid.
C.liquid dispersed in gas.
D.gas dispersed in liquid.
3.Chromium molybdenum steel can not be welded using __________ welding.
A.thermit
B.electrical resistance
C.oxy-acetylene
D.any of these
3.Speisses is a mixture of the following:
A.Arsenides of heavy metals.
B.Antimonides of heavy metals.
C.Arsenides & antimonides of heavy metals.
D.Iron, cobalt and nickel.
4.Auto collimator is used to check
A.flatness
B.angle
C.rotor balancing
D.roughness
11.In troposphere (the weather domain), the temperature ‘t’ at height ‘h’ above the sea level in metres is given by (where, temperature at sea level is 15°C and t is in °C.)
t = 15 – 0.0065 h
t = 15 + 0.0065 h
t = 0.0035 h – 15
t = 15 – 0.0035 h
12.A high pressure boiler generates steam at a pressure greater than __________ kg/cm2 .
10
30
50
80
13.Evaporative cooling process employs a combination of cooling and humidification in which the
sensible heat is added.
sensible heat is removed and the latent heat is added.
latent heat is removed.
sensible heat is added and latent heat is removed.
14.Which of the following is not an explosive ?
TNT
CMC
RDX
Lead azide
16.Annealing ofwhite cast iron produces __________ iron.
grey
nodular
malleable
spheroidal
17.Resistance of an electrical conductor is proportional to its (where, l = length and A = cross-sectional area of the conductor)
A
l
A2
both ‘a’ & ‘b’
18.A solar cell converts the sunlight directly into __________ energy.
thermal
electrical
mechanical
chemical
19.If a nuclear reactor produces more fissile nuclear fuel than it consumes, then it is called a __________ reactor.
critical
breeder
fertile
heterogenous
20.Wrought iron is never shaped by
casting
cold working
forging
welding
21.Powder metallurgy process does not make metal powder by
atomisation
grinding/milling
hammering
electrolytic deposition
22.In the blast furnace, incorporation of water vapour in the blast gives the following effect.
Increases the reducing potential of the gas.
Increases the flame temperature.
No significant change occurs.
Increases the hydrogen content in the metal.
23.Pick out the wrong statement.
A ferromagnetic material becomes paramagnetic above the ‘Curie temperature’.
Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials.
Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces.
Tungsten steel and alnico are not hard magnetic materials.
24.The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel.
60 – 100
400 – 700
1200 -1500
2000 – 2300
25.Maximum permissible air velocity in pipelines is about __________ metre/second.
5
10
20
40
26.Area under the stress-strain curve upto the __________ is referred to as the modulus of resilience.
yield strength
elastic limit
proportional limit
maximum point
27.
__________ is the hardest oxide and is hence used where high wear resistance at high temperature is required.
Beryllia
Zirconia
Alumina
Magnesia
28.
Titanium alloys are welded using the Following process:
TIG welding.
Submerged arc welding.
Butt welding.
Electron beam welding.
29.
An alloy of Fe – 0.4 % C is
cast iron.
hypo-eutectoid steel.
hyper-eutectoid steel.
eutectoid steel
30.
A material in which the atoms are arranged regularly in some directions but not in others, is termed as ‘mesomorphous material’; an example of which is
lead
glass
mica
silver
i have done the written part simulation needed for both labs. and pls i need the aspen back up file. i want u to save it as a backup file. I am uploading instructions files for both labs and the work i have completed
Write: a 1-paragraph summary to answer the two questions mentioned below. Your summary should be well-organized, concise, and demonstrate your understanding of the concepts discussed in the readings.
Questions:
1. What aspects of child development theory have intrigued you the most?
2. How do you think these theories apply to real-life scenarios or experiences?
Choose a child development theory from the link in chapter 1.5: https://socialsci.libretexts.org/Bookshelves/Early_Childhood_Education/Book%3A_Child_Growth_and_Development_(Paris_Ricardo_Rymond_and_Johnson)
The details for the capstone project are mentioned below:
Course-M.Eng Chemical Engineering
Objective of Project
For petroleum containing a substantial residue fraction, estimate the average molecular mass in
the residua by making use of the three macroscopic properties: (i) viscosity, (ii) density, and (iii)
refractive index. Of specific interest are to make use of data sets in literature that contain both
straight run petroleum (unconverted petroleum) and converted products from that petroleum.
Information of the attachments and correction in formula.
1) Images 1-5 provides description along with dataset and the journal as well provided in the datasets images 2-5.
Please Look onto this error clarified below for no confusion
In the image 5,
3.3) Liquid Density is not Liquid Density its Refractive Index you’ll understand while going through Images 1-5.
2) Format For the Capstone Project (Image 6 – Image 7)
3) All the Images from 1 to 7 are described by the professor for the capstone project so we have to do everything based on the above shown pictures description along with format.
Additional Information:
There are four references in the description by the professor prefer those 4 in references too. Everything is well described in format and description for the capstone project.
Their is also change in formula for molar refraction equation which will is ” (n2+0.4)” it should be “(n+0.4)” also attached the whatsapp image in the attachment so calculate according to the correct formula not the older one or wrong one mentioned in pictures attached
5) Provide links along with pdf as well for all the references used in the report.
6) From the Introduction to the Conclusions, the report should be between 5 000 and 10 000
words. Use 12-point font in a legible format (Arial, Calibri, Times New Roman, etc.). The report should be double-spaced, with 1 inch margins all around.
Please find the attached Images 1 to 7 below along with image 1 (2) for references provided in the description as well as whatsapp image which is correction of molecular formula.
The purpose of this assignment is to increase your knowledge of the link between social determinants of health (SDOH) and a high priority health issue with a global perspective.
Overview
Several factors come together to create an individual’s health status. The conditions in which people are born, live, work, and age can be as influential in determining an individual’s health status as the quality of diagnosis and treatment. Health care professionals need to understand the influence of these underlying conditions to deliver the best health care possible. A good example of how these factors are intertwined is the Carter Center’s work in eradicating the guinea worm in Africa and Asia. To quote from the website: When The Carter Center began leading the international campaign to eradicate Guinea worm disease in 1986, there were an estimated 3.5 million cases in at least 21 countries in Africa and Asia. Today, that number has been reduced by more than 99.99 percent. In 2020, 27* human cases of Guinea worm disease were reported worldwide. Between January 1 and June 30 of 2021 five human cases have been reported. https://www.cartercenter.org One of the major strategies used to reach this goal was teaching individuals to filter drinking water and to not go into water if infected. This was difficult for several reasons: (a) lack of health care practitioners in the largely rural area, (b) the insecurity in some areas related to conflict, and (c) cost of filtration equipment. The coordination of effort across several organizations led to the success.
The group of factors included in the SDOH are: (a) economic stability, (b) education access and quality, (c) social and community context, (d) health care access and quality, (e) neighborhood and built environment. Review the resources listed in the Instructional Materials for this module to learn more about the SDOH. Instruction
The focus of this assignment is to strengthen your understanding of the impact of at least one of the social determinants of health on a priority health issue in one of the countries listed below.
Choose from one of the following countries:
Sierra Leone
Haiti
Pakistan
Somalia
Sudan
Afghanistan
You will write a 2.5-3 page, double-spaced (~750 words) essay addressing the following:
Provide a brief description of the country you have selected. This may include information on the size of the population; median income; geography/topography; cultural and/or religious influences, etc.)
Identify one priority health issue in the chosen country. Describe the global health indicators you are using to identify the priority health issue (ie., life expectancy; maternal and infant mortality; child malnutrition, such as stunting, wasting, and underweight; infectious disease and mortality; vaccination coverage; health worker density, etc.) https://www.who.int/data/gho/data/indicators
Provide a brief description of the concept of SDOH.
Identify the SDOH that has the most impact on the identified health issue in the selected country.
Explain the link between the SDOH and the identified healthcare priority. It is possible that more than one of the SDOH categories will be applicable (you only have to include one).
Include a minimum of three (3) references. One (1) reference must be a scholarly article. References must be no more than five (5) years old. The paper will contain an introduction, a body, and a conclusion. An appropriately formatted student paper title page must be included