Category: Civil Engineering

This is a somewhat dated video and a little bit over-acted. However, the accurate and detailed depiction of Focus Four hazards makes it very useful. Watch the video, but before you do, prepare a little tally sheet with rows for:
Fall hazards
Struck by hazards
Caught in/Caught between hazards
Electrical hazards
Every time you see a fall hazard depicted—whether it is being controlled or not—jotdown the minute and second of the video on your tally sheet in the row for fall hazards. There should be about three entries for each type of hazard. For example, at minute 4:10 there is a worker standing next to a heavy swinging sewer pipe posing a struck-by hazard. Post your tally sheet to a new thread on the discussion forum.
Then compare notes with your classmates (or group members) by commenting on at least two other posts. Focus not about what time signature you recorded, but the nature of the hazard. Normally, at this stage of the course, there will be many different hazards noted: that’s the idea. As a wise professor once said, there is a big difference between “looking” for a hazard, and “seeing” one. We are beginning to train ourselves to “see” hazards in the myriad of our daily lives, and in particular, on construction sites we pass on the way to work, and so forth.

Rewrite it by hand and in regular handwriting (preferably the handwriting is not good)I will send my I want someone to copy my handwriting
The font must be similar to the font in the sent image, each file must be sent separately, and everything must be written and drawn.

I need your support to provide me with the following:
– Word format – Avoid plagiarism – power point for presentation for the subject of the :
Pavements management systems I need a report that conforms to the attached standards and the minimum number of pages (22) and add the citation in the content and references at the end of the paper with reliable sources for the last 10 years (at least 15 references)
Make sure your report is organized (table of contents, table of figures, introduction, sections, conclusion and).
Be sure to follow all guidelines for style references and paper content and apply everything in the attached Word document (((Follow the instructions and try to do it professionally in the submitted file)))

I need your support to provide me with the following:
– Word format
– Avoid plagiarism
—————————————————————————————
For the subject of The Impact of Seaports on Coastal Erosion
need report with compliance of the attached criteria and minimum count of words”2500″, and adding the citation in the content and references at the end of paper with creditable sources for last 5 years “at least 10 references ”
Make sure your report will structured (Table of content, Table of figures , Introduction, sections , conclusion and references).
Make sure you follow all the guidlines for the references style and for the content of the paper

I need your support to provide me with the following:
– Word format
– Avoid plagiarism
—————————————————————————————
For the subject of :
Seaport Technology and Innovation
I need report with compliance of the attached criteria and minimum count of words”5000″, and adding the citation in the content and references at the end of paper with creditable sources for last 5 years “at least 10 references ”
Make sure your report will structured (Table of content, Table of figures , Introduction, sections , conclusion and references).
Make sure you follow all the guidlines for the references style and for the content of the paper

Energy Management and Performance Evaluation for non-demostic building (Collage building). Thise report include data in tow files (word document , Exl sheet) based in information given and require .All the informaton will be attache below .

Energy Management and Performance Evaluation for non-demostic building (Collage building). Thise report include data in tow files (word document , Exl sheet) based in information given and require .All the informaton will be attache below .

i need answer of this Assignment with must be in 3500 words
must include 15 pictures or flow charts
you can find on assignment guidance pdf how to do assignment for student 2 section 2 which i have uploaded below
Assignment should be based on Section 2 which is student 2 on project brief which i have uploaded below—–. An overview of the environmental issues affecting the construction & operation of the
project.
These could include :-
Manufacture Waste
Energy usage Wild Life
Aesthetics/ design Fish
Types of materials used. Protected Species
Transportation Water Pollution
Contaminates Noise
Dust
How will any of these issues affect the design, construction, aftercare and
end of life of your structure?
Section II – Environmental & Stakeholder Management (Student 2)
2. A detailed report supporting the process in which public concerns will be addressed.
How are public concerns dealt with regarding new developments.?
Examples that could be investigated could include:-
Heathrow airport terminal 5
Thames Barrier.
Cross Rail
A new housing development
Where do Town and Country Planners fit into all of this?
Section II – Environmental & Stakeholder Management (Student 2)
3. Evaluate how Low Carbon Planning helps to integrate energy efficiency and renewable
energy sources cost effectively into the new development. (e.g. identify the measures used
to minimising construction waste, embodied energy and carbon emissions, in low carbon
energy design and planning)
You will need to consider the following:-
• Low Carbon planning
• What are renewable energy sources
• How will construction waste be reduced
• How does embodied energy affect the manufacturing process then the carbon foot print?
• How did you consider a low carbon design for your project?
Project Brief – The Millennium Mills Redevelopment Cities across the world are already feeling the effects of the climate crisis and need to ensure that they are resilient to a future which could result in a variety of changeable weather, such as more powerful rainfall events, higher temperatures and sea level rise. This means that all new developments need to be designed to be resilient in an uncertain world in 2050 to ensure that the people living, working and visiting there are safe, healthy, comfortable and productive. Silvertown Quays in London’s Royal Docks is a waterside site which will be developed over the next 10-15 years and needs to be designed to be 2050- ready. The client has already received several proposals regarding the refurbishment of the Mills but remains unsatisfied with these proposals. Details of the context and background to the Millennium Mills can be found in Appendix A. Your team is an engineering consultancy company and has been commissioned by the lead developer Lendlease to carry out a feasibility study and outline design for the redevelopment of the Millennium Mills located on the southern side of the Royal Victoria Dock and associated infrastructure. You will be considering plot 4 for the construction of a new building to facilitate the client’s requirements below. Basic details, and site plans are provided on the Moodle site for EG7034 – with further documentary details and materials accessed online from the Newham London Borough Planning Portal. Access details of which are in Appendix B. Project requirements Lendlease is looking to you for answers as to how to achieve from the project the most appropriate: • Sustainable approach to design that will provide long term benefit to the local and wider area of East London. • An integrated infrastructure strategy and improved access and transport links for the local people and businesses. • A strong commercial strategy & evidence that the development with be financially viable and meet its legal requirements. • Demonstrate that they meet the needs of local and regional stakeholders and environmental planning obligations • A clear procurement strategy and safe construction programme 5 • A high-quality development that showcases innovation and also provides value for money for the client and stakeholders alike. This is broken down in more detail into five (I – V) sections in Part B of this assignment.

i need answer of this Assignment with must be in 3500 words
must include 15 pictures or flow charts
you can find on assignment guidance pdf how to do assignment for student 2 section 2 which i have uploaded below
Assignment should be based on Section 2 which is student 2 on project brief which i have uploaded below—–.
An overview of the environmental issues affecting the construction & operation of the
project.
These could include :-
Manufacture Waste
Energy usage Wild Life
Aesthetics/ design Fish
Types of materials used. Protected Species
Transportation Water Pollution
Contaminates Noise
Dust
How will any of these issues affect the design, construction, aftercare and
end of life of your structure?
Section II – Environmental & Stakeholder Management (Student 2)
2. A detailed report supporting the process in which public concerns will be addressed.
How are public concerns dealt with regarding new developments.?
Examples that could be investigated could include:-
Heathrow airport terminal 5
Thames Barrier.
Cross Rail
A new housing development
Where do Town and Country Planners fit into all of this?
Section II – Environmental & Stakeholder Management (Student 2)
3. Evaluate how Low Carbon Planning helps to integrate energy efficiency and renewable
energy sources cost effectively into the new development. (e.g. identify the measures used
to minimising construction waste, embodied energy and carbon emissions, in low carbon
energy design and planning)
You will need to consider the following:-
• Low Carbon planning
• What are renewable energy sources
• How will construction waste be reduced
• How does embodied energy affect the manufacturing process then the carbon foot print?
• How did you consider a low carbon design for your project?
Project Brief – The Millennium Mills Redevelopment Cities across the world are already feeling the effects of the climate crisis and need to ensure that they are resilient to a future which could result in a variety of changeable weather, such as more powerful rainfall events, higher temperatures and sea level rise. This means that all new developments need to be designed to be resilient in an uncertain world in 2050 to ensure that the people living, working and visiting there are safe, healthy, comfortable and productive. Silvertown Quays in London’s Royal Docks is a waterside site which will be developed over the next 10-15 years and needs to be designed to be 2050- ready. The client has already received several proposals regarding the refurbishment of the Mills but remains unsatisfied with these proposals. Details of the context and background to the Millennium Mills can be found in Appendix A. Your team is an engineering consultancy company and has been commissioned by the lead developer Lendlease to carry out a feasibility study and outline design for the redevelopment of the Millennium Mills located on the southern side of the Royal Victoria Dock and associated infrastructure. You will be considering plot 4 for the construction of a new building to facilitate the client’s requirements below. Basic details, and site plans are provided on the Moodle site for EG7034 – with further documentary details and materials accessed online from the Newham London Borough Planning Portal. Access details of which are in Appendix B. Project requirements Lendlease is looking to you for answers as to how to achieve from the project the most appropriate: • Sustainable approach to design that will provide long term benefit to the local and wider area of East London. • An integrated infrastructure strategy and improved access and transport links for the local people and businesses. • A strong commercial strategy & evidence that the development with be financially viable and meet its legal requirements. • Demonstrate that they meet the needs of local and regional stakeholders and environmental planning obligations • A clear procurement strategy and safe construction programme 5 • A high-quality development that showcases innovation and also provides value for money for the client and stakeholders alike. This is broken down in more detail into five (I – V) sections in Part B of this assignment.

Assignment must be in 3500 words
must include 15 pictures or flow charts
you can find on assignment guidance pdf how to do assignment for student 2 section 2 which i have uploaded below
Assignment should be based on Section 2 which is student 2 on project brief which i have uploaded below—–. An overview of the environmental issues affecting the construction & operation of the
project.
These could include :-
Manufacture Waste
Energy usage Wild Life
Aesthetics/ design Fish
Types of materials used. Protected Species
Transportation Water Pollution
Contaminates Noise
Dust
How will any of these issues affect the design, construction, aftercare and
end of life of your structure?
Section II – Environmental & Stakeholder Management (Student 2)
2. A detailed report supporting the process in which public concerns will be addressed.
How are public concerns dealt with regarding new developments.?
Examples that could be investigated could include:-
Heathrow airport terminal 5
Thames Barrier.
Cross Rail
A new housing development
Where do Town and Country Planners fit into all of this?
Section II – Environmental & Stakeholder Management (Student 2)
3. Evaluate how Low Carbon Planning helps to integrate energy efficiency and renewable
energy sources cost effectively into the new development. (e.g. identify the measures used
to minimising construction waste, embodied energy and carbon emissions, in low carbon
energy design and planning)
You will need to consider the following:-
• Low Carbon planning
• What are renewable energy sources
• How will construction waste be reduced
• How does embodied energy affect the manufacturing process then the carbon foot print?
• How did you consider a low carbon design for your project?
Project Brief – The Millennium Mills Redevelopment Cities across the world are already feeling the effects of the climate crisis and need to ensure that they are resilient to a future which could result in a variety of changeable weather, such as more powerful rainfall events, higher temperatures and sea level rise. This means that all new developments need to be designed to be resilient in an uncertain world in 2050 to ensure that the people living, working and visiting there are safe, healthy, comfortable and productive. Silvertown Quays in London’s Royal Docks is a waterside site which will be developed over the next 10-15 years and needs to be designed to be 2050- ready. The client has already received several proposals regarding the refurbishment of the Mills but remains unsatisfied with these proposals. Details of the context and background to the Millennium Mills can be found in Appendix A. Your team is an engineering consultancy company and has been commissioned by the lead developer Lendlease to carry out a feasibility study and outline design for the redevelopment of the Millennium Mills located on the southern side of the Royal Victoria Dock and associated infrastructure. You will be considering plot 4 for the construction of a new building to facilitate the client’s requirements below. Basic details, and site plans are provided on the Moodle site for EG7034 – with further documentary details and materials accessed online from the Newham London Borough Planning Portal. Access details of which are in Appendix B. Project requirements Lendlease is looking to you for answers as to how to achieve from the project the most appropriate: • Sustainable approach to design that will provide long term benefit to the local and wider area of East London. • An integrated infrastructure strategy and improved access and transport links for the local people and businesses. • A strong commercial strategy & evidence that the development with be financially viable and meet its legal requirements. • Demonstrate that they meet the needs of local and regional stakeholders and environmental planning obligations • A clear procurement strategy and safe construction programme 5 • A high-quality development that showcases innovation and also provides value for money for the client and stakeholders alike. This is broken down in more detail into five (I – V) sections in Part B of this assignment.