The video presentation follows on from these recommendations…
Imagine you are presenting the recommendations to the organisation…(probably the Management Team)
To do this, you need to very briefly recap what the problem and why it’s a problem…
Then you need to focus on each recommendation – what needs to be done and how is this going to be done. It’s a project plan! Be specific! What action, who, when, where, anticipated costs…
The rest of the guidance is in the handbook about how to write the report and record the video presentation etc, along with the mark system (definitely read this!!). Just a tip, remember that you need to use a range of references, and must include People Management/ HR publications such as:
• https://www.cipd.org/uk/
• https://www.personneltoday.com/
• https://www.hrmagazine.co.uk/
• https://hbr.org/
• https://www.peoplemanagement.co.uk/newsletter-signup
UWTSD has subscriptions to all of these which you can access for your reading and references.
Based on your feedback, I have added in this to the Module Handbook (I didn’t want to change the actual assignment tasks at this stage). Let me know if there is anything else that would help here.
Video Presentation (28/4/24):
4. Briefly set the context
5. Using the recommendations from [3], identify what/how/when these will be implemented in depth; who will need to do what. This must include what needs to be done to develop the people management function so that they are able to lead and/or implement the changes
It is important to use references throughout (a minimum of 25 for the written assignment and a minimum of 15 for the video assignment), which must include people practitioner publications (e.g. People Management).
I have attached the amended version (see page 7), but not yet uploaded this to Moodle.
Category: managing people in organisations
I am currently pursuing a degree is Civil Engingeering with a specialty in structural engineering. I have to write a paper on the the “Use of epoxy-coated reinforcing steel for bridges in marine environments”.
I have to use a minimum of 10 sources which I have cited and attached below.
1. Melchers,
R. E. (1970, January 1). Principles of Marine Corrosion Chapter 6.
SpringerLink. https://link.springer.com/chapter/10.1007/978-3-319-16649-0_6
2.
Author links open overlay panelDavid A. Shifler,
AbstractCorrosion in marine environments is affected by how and to what extent
seawater interacts with materials, Evans, U. R., McBee, C. L., Bianchi, G.,
Olesen, B. H., Poulson, B., Hoar, T. P., Agladze, T. R., Sato, N., Schmuki, P.,
Kruger, J., Craig, B., Thomas, R. L. S., Griffin, R. B., Compton, K. G.,
Dexter, S. J., Davis, J. R., Wentland, E. J., & McNeil, M. (2005, May 25). Understanding
material interactions in marine environments to promote extended structural
life. Corrosion Science. https://www.sciencedirect.com/science/article/pii/S0010938X05000995
3. Smith,
L. L., Kessler, R. J., & Powers, R. G. (n.d.). Corrosion of Epoxy-coated
Rebar in a Marine Environment. https://onlinepubs.trb.org/Onlinepubs/trcircular/403/403.pdf#page=36
4.
Author links open overlay panelDavid G. Manning,
AbstractThe paper combines a brief history of epoxy-coated reinforcing steel in
North America with a summary of investigations of its corrosion performance.
Epoxy-coated reinforcement was developed in the early 1970s. After
demonstration projects in the m, Pike, R. G., Clifton, J. R., Kilareski, W. P.,
Clear, K. C., Virmani, Y. P., Zayed, A., Sagues, A. A., Sagues, A., Kenneth,
C., Scannell, W. T., Pfeifer, D. W., Sohanghpurwala, A. A., Manning, D. G.,
Schiessl, P., & Jilek, J. H. (1999, May 3). Corrosion performance of
epoxy-coated reinforcing steel: North American experience. Construction and
Building Materials. https://www.sciencedirect.com/science/article/pii/0950061895000283
5.
Author links open overlay panelŞ Erdoğdu a, a, b,
AbstractTo simulate marine and bridge deck environments, Alonso, C., Hansson,
C. M., Gjorv, O. E., Weyers, R. E., Liu, P. C., Verbeck, G. J., Kay, E. A.,
Smith, L. L., & Erdoğdu. (2001, June 14). Accelerated testing of plain
and epoxy-coated reinforcement in simulated seawater and Chloride Solutions.
Cement and Concrete Research. https://www.sciencedirect.com/science/article/pii/S0008884601004872
6. Sagüés,
A. A., Lau, K., Powers, R. G., & Kessler, R. J. (2010, June 1). Corrosion
of epoxy-coated rebar in marine bridges-part 1: A 30-year perspective.
Allen Press. https://meridian.allenpress.com/corrosion/article-abstract/66/6/065001/162991/Corrosion-of-Epoxy-Coated-Rebar-in-Marine-Bridges
7. Lau,
K., Sagüés, A. A., & Powers, R. G. (2010, June 1). Corrosion
of epoxy-coated rebar in marine bridges-part 2: Corrosion in cracked concrete.
Allen Press. https://meridian.allenpress.com/corrosion/article-abstract/66/6/065002/162994/Corrosion-of-Epoxy-Coated-Rebar-in-Marine-Bridges
8.
Cui, F., Lawler, J., & Krauss, P. (2007, March 11).
Corrosion performance of epoxy-coated reinforcing bars in a bridge
substructure in marine environment. OnePetro. https://onepetro.org/NACECORR/proceedings-abstract/CORR07/All-CORR07/118562
9. Weyers,
R. E., Pyc, W., & Sprinkel, M. (1996, November 30). Corrosion protection
performance of bridge decks and marine substructures constructed with epoxy
coated reinforcing steel in Virginia. TRID. https://trid.trb.org/View/716900
10. Pyc,
W. A. (1998, September 4). Field performance of epoxy-coated reinforcing
steel in Virginia Bridge Decks. VTechWorks Repository. https://vtechworks.lib.vt.edu/items/eaa95b53-e187-4e47-80a6-611d11b24c0a
11.
Lau, Kingsley,
Sagüés, A. A., & Powers, R. G. (2007, March 11). Long-term
corrosion behavior of epoxy coated rebar in Florida bridges. OnePetro. https://onepetro.org/NACECORR/proceedings-abstract/CORR07/All-CORR07/127049